Acorn To Arabella · video

What this video covers

Steve finishes painting the boom for the wooden boat Arabella using a two-part epoxy primer and topcoat, applying three coats in a workshop environment to build a durable base.1:42 He uses a hot-coating technique to layer the epoxy without sanding between coats, then finishes with a light sand using 100-grit paper before applying the final topcoat.2:51 To address a previous boom repair, he adopts Thixo LV, a low-viscosity thickened epoxy, for better penetration into cracks compared to the standard high-viscosity version.3:08 On the boat, he replaces a noisy bronze traveller shackle with a Dyneema loop bridle to reduce mechanical noise and allow for adjustable boom positioning.15:18 He also installs new stack pack sail covers, securing them loosely to the boom and gaffs with plans to finalise the lacing and tensioning once weather conditions allow for a calm day.24:26 The project demonstrates the transition from traditional bronze hardware to modern synthetic lines for rigging and sail management.20:48

More from Acorn To Arabella

We Stripped Our Wooden Sailboat Back to Bare Wood... AgainOct 2026Saying Goodbye to Newfoundland—and the Man Who Inspired ArabellaSept 2026Upgrading the Rudder and Another Trek To The CliffAug 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastJul 2026

From Acorn To Arabella — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.