SEILmagasinet · video

What this video covers

A single-handed docking technique using a loop line (løkkespring) replaces a conventional spring line when no bow thruster is available and wind makes berthing difficult.Watch The method works as follows: rig a loop from the boat's midship cleat, led aft to the stern.0:25 Approach the dock at roughly 45 degrees as normal, then swing the bow until the boat lies parallel to the berth.0:34 Put the engine in neutral, walk forward along the side deck, and drop the loop over a dock cleat or bollard.0:38 Return to the helm, engage forward gear, and ease the throttle up gently until the loop tightens.0:46 With light forward thrust the boat holds steady and parallel against the dock, freeing the skipper to step ashore and set proper bow and stern lines.1:03 The loop is then replaced with two full spring lines.1:09 The technique requires no crew and no bow thruster, relying instead on engine thrust against the tensioned loop to keep the boat stable while lines are rigged.

More from SEILmagasinet

New standing rigging on a 2000 X-362Sept 2026Two men out – Who’s going out Ep. 3Sept 2026Is the boat equipment of the future portable? We are elevating comfort with modular boat equipmentSept 2026Dufour 39 with more space for your moneySept 2026

From SEILmagasinet — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.