Sven Yrvind · video

What this video covers

Sven Yrvind modifies the aft mast support and swim ladder mounting system on his boat using a modular construction technique. He creates 7-centimeter spacers by combining 5-centimeter and 2-centimeter components, allowing for precise alignment and structural reinforcement.▶ 0:03 To ensure the swim ladder maintains a proper angle, he reinforces the support structure with glass fiber and epoxy, incorporating lead weights in a plastic bag to maintain tension during the curing process.▶ 3:42 The mast adaptation involves fitting the mast inside a pipe assembly, which is then secured with epoxy.▶ 2:28 He uses sandpaper beneath components to prevent slippage and employs a 12-degree angle for the mounting surface.▶ 0:49 The process relies on ad-hoc adjustments, including grinding down excess material if the fit is too tight.▶ 3:27 This modular system allows for consistent construction regardless of the vessel's overall size.▶ 0:51

More from Sven Yrvind

Kai the bow paddle.Jul 2026About safety.Jul 2026My solution to crossing the Doldrums without using an engine.Jul 2026Goose Barnacles Remower.Jul 2026

From Sven Yrvind — see the channel’s boat, crew, and every analysed video.