Sailing Uma · video

What this video covers

The crew of the Pearson 36 *Uma* successfully removed the vessel's keel to address long-standing grounding damage and structural delamination at the keel joint. After drilling through the keel to access the original 12 bronze J-bolts, the team used a custom-built drill bit to clear resin and debris, eventually separating the keel from the hull. They replaced the original hardware with eight one-inch stainless steel bolts, installing them with JB Weld to ensure 100% thread engagement and structural redundancy. To reinforce the keel stub, the crew applied seven layers of fiberglass and approximately 20 kilograms of resin, utilizing a vacuum bagging technique to remove air bubbles and ensure a uniform, high-strength laminate. The repair process involved tapering the glass layers into the hull to create a continuous, reinforced structure. The project concludes with the keel stub significantly stronger than the original factory specification.

Boats in this video

More from Sailing Uma

Our boat won’t look the same after this | Step 495Aug 2026The ONE Thing We Disagreed on This Entire Refit | Step 494Aug 2026We Owe You The Full StoryJul 2026We spent $10,000 on something Pretty | Step 493Jul 2026

From Sailing Uma — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.