BoatworksToday · vidéo

Ce que couvre cette vidéo

To install a new cabin sole in a 1970 Paceship 24, the project requires creating precise templates and performing a dry fit using OSB before cutting the final Coosa panels. Because the hull tapers inward, the OSB templates are oversized by approximately half an inch to allow for later undercutting and a tight final fit.1:40 The panels are beveled at 45 degrees to sit flush against the hull and make full contact with the top of the keel.6:34 The installation uses Coosa Blue Water 20 panels for structural flooring and bulkheads, while the lighter Nautical series is reserved for non-structural components like bunks and cabinetry.8:44 When cutting Coosa, carbide-tipped blades are essential, as the fiberglass reinforcement within the panels dulls standard high-speed steel blades within minutes.10:25 Once the panels are cut and fitted, they are glassed on both sides to create a unified, stiff floor structure.

Plus de vidéos de BoatworksToday

V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!août 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuil. 2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!juil. 2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!juil. 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.