BoatworksToday · vidéo

Ce que couvre cette vidéo

Fairing a transom requires a systematic approach to identify and level high and low spots before painting. Applying a guide coat of primer reveals surface imperfections, such as pinholes and uneven areas, by highlighting where sanding blocks make contact.3:39 For rough fairing, an electric longboard reduces physical strain, while a rigid 32-to-34-inch manual sanding board ensures a flat finish for fine-tuning.5:53 When applying filler, pulling the trowel lengthwise across the surface—rather than across the contour—prevents the tool from following dips and ensures the filler bridges gaps.11:29 If the primer remains within its 24-hour recoat window, spot-filling pinholes with epoxy filler requires no intermediate sanding.18:27 After filling, sanding with 120-grit paper followed by three consecutive daily coats of primer creates a smooth, paint-ready surface.24:25 A dry fit of hardware, such as an outboard bracket, confirms that the transom surface is sufficiently flat before final assembly.21:43

Plus de vidéos de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?août 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!août 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!août 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuil. 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.