BoatworksToday · video

What this video covers

Fiberglassing stringer extensions to the transom of a Bertram 25 requires a strategic approach to material layering and surface preparation. To ensure a chemical bond without sanding, use a non-waxed, polyester-based structural repair putty as a base.5:09 When laminating 1708 biaxial fiberglass over complex angles, cut the fabric into progressively larger pieces to achieve a flush transition.6:13 To manage tight radii and wrap the glass around the transom, cut relief slits into the fabric to allow the material to fan out and maintain surface contact.7:01 Apply a fillet of structural putty to create a smooth transition ramp before laying the wet fiberglass.12:36 Work wet-on-wet to allow for manual contouring and shaping of the laminate before the resin cures.13:17 Leaving the bottom edges open ensures potential drainage.8:00 Proper planning and dry-fitting the fiberglass pieces before catalyzing the resin prevents errors during the fast-paced layup process.7:36

More from BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?Aug 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!Aug 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Aug 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraJul 2026

From BoatworksToday — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.