BoatsMariner 31

Mariner 31

Masthead Ketch · Long Keel · First built 1968

A long-keeled masthead ketch and the first fiberglass hull from Far East Yachts, featuring a plywood-cored deck

Designed by C. Oberly, built by Far East Yachts.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Long Keel

See her sail

The Mariner 31, on the water

The fleet's own footage — the truest look at how she really moves.

Footage from Be The Captain

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

Shoal draftDraws 1.12 m, board up where she has one — creeks, sandbars and thin anchorages most keels have to stay out of.
LivelySea-kindly

Her heavy displacement on a moderate beam gives 32 — a sea-kindly motion in a seaway.

Comfort ratio 32
CoastalBluewater

1.73 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.73
LightHeavy

310 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 310
EasygoingPowered-up

12.5 — modest power for her weight; easygoing rather than lively, and happier with a breeze.

Sail area / displacement 12.5
TenderStiff

43% of her weight is ballast — stiff, standing up well to her sails.

Ballast 43%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

  • Draws less than ~85% of boats her size on file

Compared with 412 boats of the same type within a quarter of her length.

What the fleet has seen

The Mariner 31, as the fleet has seen it

Derived from the videos the fleet has analysed of this model. ▶ marks open the moment aboard.

The Mariner 31 is a masthead ketch sailboat designed by C. Oberly and built by Far East Yachts from 1968 to the present. It features a long keel hull, measures 9.3 meters LOA, has a 3.0-meter beam, and draws 1.1 meters with a displacement of 5216 kg. The Mariner 31 was the first fiberglass hull produced by Far East Yachts, though its decks and cabintrunk were constructed from plywood covered with fiberglass. Variants of the design include the Mariner 32 and the Fuji 32. The model is not typically cited for offshore cruising suitability, with some similar-era boats under $50,000 being noted for design flaws or poor sailing performance.0:17

The living fleet

Sailed by the fleet

Where the fleet has filmed this boat.

Basemap © Wikimedia Commons · CC BY-SA 4.0

What they go for

Market signal

Where the fleet has seen this model for sale, and the asking prices that came with it.

1seen for sale
$3,599Median asking

From the fleet's own footage — our observed signal, not broker listings.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
43.5%
Rig & sail area
Rig
Masthead Ketch
Ratios
SA / displacement
12.5
Displacement / length
309.6
Comfort ratio
31.6
Capsize screening
1.73
Hull speed
6.8 kn
Pounds / inch immersion
888
Hull
Hull type
Long Keel
Construction
FG with wood deck and cabin
Production
Years built
First built 1968
Designer
C. Oberly
Builder
Far East Yachts

Boats like this, on the water

More boats like her, on the water

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Mariner 329.70 mSame hull family0.4 m longerA long-keeled masthead ketch by Clair Oberly, featuring a distinctive Clipper bow and an open, taffrail-surrounded cockpit
Cape Dory 319.55 mSame hull family0.2 m longerA Carl Alberg-designed cutter with a long keel, built between 1983 and 1985 for traditional, steady offshore cruising
Allied Boat Co. Seawind9.30 mSame hull familyNear-identical lengthA Thomas Gillmer-designed masthead ketch with a long keel, marking both the beginning and the end of the Allied Boat Co.
Bayfield 30/329.75 mSame hull family0.4 m longerA rare 32C variant featuring a tall rig, built in a limited run of five hulls for increased sail area
Nicholson 329.75 mSame hull family0.4 m longerA long-running production classic with a 55% ballast ratio, built over two decades for steady offshore passage making
Cape Dory 30C9.21 mSame hull familyNear-identical lengthA cutter-rigged cruiser with a full keel and a 1.27-metre draft, built for steady performance between 1976 and 1987

The family

Related models

The designs closest to hers — usually the rest of the builder's range, sometimes the same hull sold under another name.

Keep asking

The fleet has more to say

Search what's been said about the Mariner 31, or ask a specific question — the answer comes back written out, with links to the moments it draws on.

The newsletter

New boats, new stories, from everywhere.

One email from the fleet — boats newly added, videos newly analyzed. No noise.

Report an issue