BoatsEricson Yachts 39 B

Ericson Yachts 39 B

Cutter · Fin With Rudder On Skeg · 1975–1978

A Bruce King-designed cutter featuring a trunk cabin layout that offers a cruising alternative to the flush-decked 39

Designed by Bruce King.

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her heavy displacement on a narrow beam gives 35 — a sea-kindly motion in a seaway.

Comfort ratio 35
CoastalBluewater

1.70 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.70
LightHeavy

314 — heavy for her waterline, built to carry stores and ride steadily.

Displacement / length 314
EasygoingPowered-up

16.3 — moderate power for her weight; steady, all-round performance.

Sail area / displacement 16.3
TenderStiff

50% of her weight is ballast — stiff, standing up well to her sails.

Ballast 50%

Built heavy and sea-kindly — a boat made to cross oceans and forgive a rough night.

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
50.0%
Rig & sail area
Rig
Cutter
Ratios
SA / displacement
16.3
Displacement / length
314.1
Comfort ratio
35.4
Capsize screening
1.70
Hull speed
7.3 kn
Pounds / inch immersion
1215
Hull
Hull type
Fin with rudder on skeg
Construction
Fiberglass
Ballast type
Lead
Production
Years built
1975–1978
Units built
20
Designer
Bruce King
Builder
Ericson Yachts

Boats like this, on the water

Nobody has filmed this one — but these are close.

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Cavalier 3911.89 mSame hull familyNear-identical lengthA Bob Salthouse-designed masthead sloop with a skeg-hung rudder, built for offshore stability between 1973 and 1979
C&C Yachts Landfall 3911.81 mSame hull familyNear-identical lengthA Rob Ball-designed masthead sloop built for comfortable cruising with a skeg-mounted rudder for offshore security
RM Yachts 118011.80 mSame hull familyNear-identical lengthA Marc Lombard-designed performance cruiser featuring a wide beam, dual rudders, and a powerful cutter rig
Hallberg-Rassy 3911.85 mSame hull familyNear-identical lengthProduced in two versions over twelve years, this cruiser evolved from the 1991 MK I to the extended MK II with a bathing platform
C&C Yachts 3911.96 mSame hull familyNear-identical lengthA 1971-1974 production masthead sloop with a moderate displacement-to-length ratio, balanced for coastal cruising
Comfortina 3911.85 mSame hull familyNear-identical lengthA 2007 fractional sloop with a 2.0-metre draft and a 10.88-metre waterline designed for offshore stability

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Keep looking

Nothing filmed of this one yet

Two ways to keep looking — both search what the fleet has actually recorded.

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue