BoatsTayana 48

Tayana 48

Cutter · Fin With Rudder On Skeg · First built 1992

A Robert Perry-designed cutter featuring a raised salon and elevated floor for enhanced interior visibility

Designed by Robert H. Perry, built by TA Yang Yacht Building Co. (Taiwan).

LOA
Beam
Draft (max)
Displacement
Ballast
Hull type
Fin With Rudder On Skeg

See her sail

The Tayana 48, on the water

The fleet's own footage — the truest look at how she really moves.

Footage from Sailing Nandji - Frothlyfe

Is it for you?

Character

Where this design lands on the numbers a shopper trusts — read straight from her own ratios.

LivelySea-kindly

Her moderate displacement on a moderate beam gives 36 — a sea-kindly motion in a seaway.

Comfort ratio 36
CoastalBluewater

1.78 — just under the 2.0 offshore line; her beam is modest for her weight.

Capsize screening 1.78
LightHeavy

240 — moderately heavy for her waterline, a balanced cruising weight.

Displacement / length 240
EasygoingPowered-up

19.8 — plenty of sail for her weight; lively and quick to respond.

Sail area / displacement 19.8
TenderStiff

33% of her weight is ballast — on the tender side; she'll heel readily and want a reef sooner.

Ballast 33%

Powered-up and quick to accelerate — this one likes to sail.

  • Heavier than ~87% of boats her size on file
  • Draws less than ~76% of boats her size on file
  • Beamier than ~83% of boats her size on file

Compared with 1961 boats of the same type within a quarter of her length.

The living fleet

Sailed by the fleet

Where the fleet has filmed this boat.

Basemap © Wikimedia Commons · CC BY-SA 4.0

The record

Full specifications

The complete reference set — tap any figure to switch between metric and imperial.

Dimensions
Weights
Ballast / displacement
33.4%
Rig & sail area
Rig
Cutter
Ratios
SA / displacement
19.8
Displacement / length
239.6
Comfort ratio
36.1
Capsize screening
1.78
Hull speed
8.5 kn
Pounds / inch immersion
2085
Hull
Hull type
Fin with rudder on skeg
Construction
FRP w/PVC foam core
Ballast type
Cast Iron
Production
Years built
First built 1992
Designer
Robert H. Perry
Builder
Ta Yang Yacht Building Co. (TAIWAN)

Boats like this, on the water

More boats like her, on the water

Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.

Hallberg-Rassy 4614.78 mSame hull familyNear-identical lengthA German Frers-designed bluewater cruiser built for stability and comfort with a high ballast ratio and skeg-hung rudder
East Coast Long Sailing Passage - Baltimore to Fort Lauderdale 1000 Mile Sailboat Voyagefrom SailingBritican
Swan 48 - S&S14.60 mSame hull familyNear-identical lengthA versatile Sparkman & Stephens design available in sloop or ketch configurations with an optional tall rig
Sparkman & Stephens 48 Bluewater Cruiser Tour | Centre Cockpit Offshore Sailing Yacht Reviewfrom Practical Sailor
Swan 47 S&S14.58 mSame hull familyNear-identical lengthA Sparkman & Stephens design #2201 featuring a fin keel and skeg-mounted rudder for offshore stability
Aspiring Yachtmaster training | Rolling Passage Planning | Saga47swan Sailing8:08from Saga47swan Sailing
Oyster Marine 48514.78 mSame hull familyNear-identical lengthA robust cutter-rigged blue water cruiser developed from the 461, featuring a skeg-hung rudder for offshore security
I crashed my boat into the rocks. Here's the story.8:58from Be The Captain
Nicholson 4814.53 mSame hull familyNear-identical lengthA heavy-displacement masthead ketch designed by Raymond Wall for comfortable, stable offshore passage making
Living and Working in Urca | #SAL #2700:01from Hashtag Sal
Hallberg-Rassy 4414.45 mSame hull family0.2 m shorterA German Frers-designed performance cruiser featuring a modern fractional rig and dual rudders for balanced handling
HIDDEN Costs of a BRAND NEW Hallberg Rassy 44from Practical Sailor

The family

Boats like this

Nearby designs by size, type, and era — worth a look alongside her.

Tayana 47 CCA Robert Perry-designed center cockpit cutter built for offshore comfort with a high sail area to displacement ratioTayana 52A Robert Perry-designed cutter built for heavy-displacement offshore cruising with a skeg-mounted rudderTayana 47 DSA Robert Perry-designed cutter featuring a deck salon and skeg-hung rudder, built for comfortable blue-water cruisingTayana 37A Robert Perry-designed long-keel cutter with a heavy displacement and a production run of nearly 600 hullsTayana 64A Robert Ladd-designed cutter with a high sail area-to-displacement ratio for spirited performance at 64 feetTayana 55A Peter Beeldsnijder-designed cutter with a skeg-hung rudder, built for heavy-displacement offshore cruising

Keep asking

The fleet has more to say

Search what's been said about the Tayana 48, or ask a specific question — the answer comes back written out, with links to the moments it draws on.

Search the fleet for boats like thisAsk the fleet about the Tayana 48

The newsletter

New boats, new stories. Every week, everywhere.

One email from the fleet — boats newly added, videos newly analysed. No noise.

Report an issue