Living For Sail · video

What this video covers

To evaluate and repair embedded backing plates for deck hardware, remove the existing fasteners and inspect them for corrosion or thread damage.5:24 When fasteners spin or show signs of rust, test the backing plate material to determine the appropriate repair method.7:15 Use a stack of neodymium magnets to rule out mild steel, then perform a continuity test with a multimeter to confirm the plate is metallic.8:34 If the plate is stainless steel, shavings collected during drilling will show magnetic attraction.11:18 For damaged threads in embedded plates, options include installing a thread repair kit, such as Recoil, or drilling and tapping the hole to the next bolt size.11:57 Increasing a 5/16-inch hole to 3/8-inch allows for a fresh, secure thread foundation.12:50 When tapping, use tapping fluid and frequently back the tap out to clear debris and prevent breakage.13:28 Pre-drilling the fibreglass laminate to the final tap size preserves the tap's cutting edges.14:25 Testing the repaired hole with a torque wrench confirms the integrity of the new threads.15:34

Boats in this video

More from Living For Sail

Completing this repair BEFORE it’s TOO LATE!Oct 2026Can I Save This Bronze Cleat? Sailboat Bulwark RebuildSept 2026This Was Inside The Boat!? — Should I Put It Back?Sept 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My BoatAug 2026

From Living For Sail — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.