SEILmagasinetvideo
Take control of the gas system on board
June 20, 2025 · 6 min · 407 views · Holmen, Norway
What this video covers
Thomas Nilsson visits Holmen to have a marine gas system inspected by a technician named Petter, who finds the copper pipe running from the gas cylinder through the aft cabin to the stove heavily corroded — a deck leak had kept the area damp, accelerating oxidation until the pipe was at risk of developing a gas leak.▶ 0:53 The corroded copper is replaced entirely and wrapped in plastic sleeve to protect it from moisture and salt.▶ 1:36 Petter identifies the most common gas-system faults on boats: hoses older than five years (the five-year limit runs from the production date stamped on the hose, not the installation date), and mismatched thread standards — Swedish fine-thread and German coarse-thread fittings are not interchangeable, and forcing them together leaves an unsealed joint.▶ 2:29 LPG is heavier than air, sinks into the bilge, and can displace oxygen or reach the explosive 7–9% concentration range before igniting.▶ 3:57 The gas cylinder and any reserve must be stored in a gas-tight locker with a drain hose of at least 90 mm diameter exiting through the hull side.▶ 6:09 Pressure-testing and a full inspection by a certified technician is recommended for anyone uncertain about their system's condition.▶ 5:30
More from SEILmagasinet
From SEILmagasinet — see the channel’s boat, crew, and every analyzed video.
The Sailing Directory Newsletter
One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.