BoatHowTo · vídeo

Qué cubre este vídeo

Nigel Calder explains why aluminum-cased aftercoolers and intercoolers on diesel engines — specifically a Caterpillar 3126B — are prone to severe galvanic corrosion, and what to do about it.▶ 0:48 The core problem: the seawater-side cooling element inside these units is cupronickel, and when cupronickel contacts an aluminum case with any moisture present, a galvanic cell forms.▶ 1:30 That cell can develop outside the zone protected by the sacrificial anode, leaving large areas of aluminum unprotected and actively corroding.▶ 1:50 On the original question about anode material, Calder confirms that aluminum anodes designed specifically for engine use are alloyed differently from the base metal and will function correctly without corroding at the same rate as the case.▶ 1:20 The critical maintenance step is periodic disassembly: remove the end caps, pull the cupronickel cooling element, clean all surfaces, inspect and replace the O-rings that electrically isolate the aluminum case from the cupronickel core, and reassemble.▶ 1:58 Intact O-rings are the key barrier against galvanic current flow between the two dissimilar metals.▶ 1:44

Más de BoatHowTo

ONE SWITCH for TWO PUMPS?? (Pontoon Boat Setup) | Ask The Expert with NIGEL CALDERjul 2026OIL LEAKS at the Crankshaft... | Ask The Expert with NIGEL CALDERjul 20261-2-both switch - Cost effective charging system on small boats? 🤔 Ask The Expert with NIGEL CALDERjun 202648V or 24V - What makes more sense on a Boat? | Ask The Expert with NIGEL CALDERjun 2026

De BoatHowTo — mira el barco del canal, la tripulación y cada vídeo analizado.