BoatworksToday
@boatworkstoday244K subscritores364 vídeos
BoatworksToday provides straightforward, professional guidance on marine structural repairs, fiberglass work, and electrical system installations for DIY boat owners and restoration enthusiasts.
Repairing boats for a living is what I do. Fiberglass, gelcoat, paint and woodworking are my specialties. Basically if it deals with making a boat look it's best, or structurally sound that's what I do. If you are a DIY boat owner, this is the channel for you! I keep it simple and straight forward, explaining the how's and why's things are done the way they are done. Would love to have you su…
A bordo
★Andyowner
Barco
Ontonagon, Michigan· 05/2026
Profundamente analisado
21%
Vídeos encontrados
364
Frequência de upload
15.6 dias
Último upload
30/08/2026
Atualidade
100%
364 vídeos· 75 profundamente analisados
Will This Entire Victron Electrical System Fit In My Little Boat?Andy dry-fits a 3000-watt Victron MultiPlus and two 300-amp-hour Epic batteries into a boat V-berth.30/08/2026Publicado30/08/2026
Duração21:24
Visualizações20K
The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!23/08/2026Publicado23/08/2026
Duração33:11
Visualizações10K
V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!Andy installs a Victron electrical system in a 1970 Westwind Paceship 24 using a physical V-berth mock-up.9/08/2026Publicado9/08/2026
Duração16:46
Visualizações8K
Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security CameraThe Anona Orbis PTZ camera provides solar-powered, subscription-free security monitoring with 2.5K resolution and active tracking.28/07/2026Publicado28/07/2026
Duração6:18
Visualizações4K
Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!Tabbing bulkheads in a 1970 Westwind Paceship 24 requires thickened epoxy fillets and 1708 fiberglass cloth.12/07/2026Publicado12/07/2026
Duração17:50
Visualizações11K
I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!The Jackery HomePower 3600 Plus ran a pellet smoker and warming oven for 42 hours, never dropping below 45% battery.4/07/2026
Publicado4/07/2026
Duração10:27
Visualizações3K
Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!Applying a barrier coat to the bilge seals fiberglass and simplifies future cleaning and maintenance.21/06/2026Publicado21/06/2026
Duração18:36
Visualizações9K
Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!Repairing through-hulls requires a double-bevel taper and glass-to-glass contact for structural integrity below the waterline.7/06/2026Publicado7/06/2026
Duração21:04
Visualizações10K
Giraffe Tools x Boatworks | Bringing a 56-Year-Old Sailboat Back To Life!A 1970 Westwind Payship 24 gets gutted, ground down, and pressure-washed before rebuilding begins.29/05/2026Publicado29/05/2026
Duração8:17
Visualizações7K
Weeks Of Grinding Fiberglass Led To This Boat Restoration Moment!Burning cured resin off fin rollers with a torch restores them for reuse in fiberglass lamination.17/05/2026Publicado17/05/2026
Duração17:26
Visualizações13K
2 marina options for the Summer, limited power both locations! WORK STILL NEEDS TO GET DONE!!Andy tests the Blue Eddy Elite 300 at Ontonagon, Michigan to solve a marina power shortage during boat work.3/05/2026 · Ontonagon, MichiganPublicado3/05/2026
Duração28:03
Visualizações8K
LocalizaçãoOntonagon, Michigan
Anona Aurora 4K Solar Security Camera Review - Real World Install and Honest ResultsThe Anona Aurora four-camera kit offers wireless, subscription-free 4K security monitoring with solar-powered battery redundancy.24/04/2026 · Boon Township, United StatesPublicado24/04/2026
Duração11:08
Visualizações4K
LocalizaçãoBoon Township, United States
Everything Is Starting To Come Together: Mast Mods, Fiberglassing, & Electrical!Andy prepares to level cabin sole panels with Total Fair and researches Selden fixed gooseneck mast retrofits.12/04/2026Publicado12/04/2026
Duração18:17
Visualizações10K
These Are The WRONG Sails For This Boat (+ Fiberglass Progress)!!Measuring mast and sail dimensions prevents ordering incorrect sails for a refitted 24-foot sailboat.29/03/2026Publicado29/03/2026
Duração14:25
Visualizações11K
The 600Ah Lithium Reality Check: Victron, Epoch, and ICECO for Off-Grid Survival!Andy sizes a Victron 3,000-watt inverter and two Epoch batteries against a 2,500 Wh daily load on a boat rebuild.22/03/2026Publicado22/03/2026
Duração26:34
Visualizações11K
Fitting Structural Coosa Bulkheads WAY Better Than Factory!Use OSB templates to achieve a precise, non-binding fit for structural bulkheads before cutting expensive Coosa board.15/03/2026Publicado15/03/2026
Duração18:44
Visualizações17K
Templating and Cutting Coosa Panels for the New Sailboat Cabin Sole (1970 Paceship 24)!Use carbide-tipped blades when cutting Coosa panels to prevent rapid dulling from the integrated fiberglass reinforcement.8/03/2026Publicado8/03/2026
Duração13:31
Visualizações11K
Gutting An Old Sailboat to Re-Build as a Modern Coastal Cruiser!Relocating a 162-pound battery bank to the V-berth improves weight distribution on a 24-foot coastal cruiser.1/03/2026Publicado1/03/2026
Duração18:27
Visualizações13K
600Ah of Lithium Just Showed Up for My 24' Sailboat!!A 24-foot sailboat refit requires centralizing heavy lithium battery banks to maintain proper hull trim.22/02/2026Publicado22/02/2026
Duração9:37
Visualizações10K
3 Ways to Laminate Fiberglass Patches for Boat Repair (One Works Better)A hybrid fiberglass lamination technique using a final capping layer prevents roller snags and edge shifting.15/02/2026Publicado15/02/2026
Duração17:19
Visualizações23K
Fiberglass Over Old Thru-Hulls — Permanent Repair!!A 12-to-1 taper and 1708 fiberglass cloth restore hull integrity when permanently closing redundant through-hulls.8/02/2026Publicado8/02/2026
Duração24:51
Visualizações25K
Designing a Functional Quarter Berth Layout on a Small Sailboat!Removing a non-structural partition in a Westwind 24 extends quarter berths to six feet for sleeping.25/01/2026Publicado25/01/2026
Duração20:31
Visualizações11K
Correcting a Sagging Solid Fiberglass Sailboat Deck!A belt sander and 1708 fiberglass cloth correct a sagging, non-cored solid fiberglass cabin top.18/01/2026Publicado18/01/2026
Duração13:40
Visualizações14K
I'll Never Be At This Fiberglassing Stage Again On This Sailboat Project | 1970 Westwind Paceship 24Andy evaluates remote-mount bilge pump options for a shallow, divided bilge on a Paceship Yachts Westwind 24.11/01/2026Publicado11/01/2026
Duração13:39
Visualizações16K
Why I’m Using Coosa Instead of Marine Plywood For My Sailboat Interior (This Is What I've Learned)Coosa panels provide a rot-proof, dimensionally stable alternative to marine plywood for sailboat interior bulkheads and furniture.28/12/2025Publicado28/12/2025
Duração10:19
Visualizações16K
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Fiberglass Boat Repair Is Problem Solving!Restoring cabin port lights on a Paceship Yachts Westwind 24 requires balancing exterior fairing with interior reinforcement.21/12/2025Publicado21/12/2025
Duração19:30
Visualizações11K
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Portlights GONE!Choosing polyester over epoxy resin eliminates inter-session sanding when glassing over portlights in multiple sessions.14/12/2025
Publicado14/12/2025
Duração15:44
Visualizações11K
Grinding Fiberglass For Deck Hardware Removal, Winch Tear-Down & Chainplate Welding ConcernsUse carbide bits in a die grinder to efficiently clear fiberglass around seized deck hardware fasteners.7/12/2025
Publicado7/12/2025
Duração10:05
Visualizações11K
Moisture Meters 101: Are My Decks Rotten Or Is It Something Else?Use a pin-less moisture meter to establish a dry baseline before scanning deck cores for potential rot.23/11/2025
Publicado23/11/2025
Duração18:12
Visualizações13K
How to Spot Hidden Problems in a Used Boat (DIY Survey Guide)Sound the hull in a grid pattern and use a moisture meter to identify hidden structural damage.16/11/2025
Publicado16/11/2025
Duração23:56
Visualizações16K
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Gutting The Interior For InspectionA 1970 Westwind Paceship 24 undergoes interior demolition to remove rotten bulkheads and a damaged cabin sole.2/11/2025
Publicado2/11/2025
Duração14:40
Visualizações12K
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Moving DayA 1970 Westwind Paceship is moved to a shop for a winter restoration alongside a Bertram project.19/10/2025
Publicado19/10/2025
Duração17:51
Visualizações12K
Potential Sailboat Restoration: Bringing a Classic Back to Life?A 1970 24-foot Westwind Paceship undergoes inspection for a potential restoration project involving interior structural repairs.28/09/2025 · Boon Township, United States
Publicado28/09/2025
Duração16:33
Visualizações14K
LocalizaçãoBoon Township, United States
HOW TO ~ Wet Sanding And Buffing A Painted Surface To Remove Blemishes On Your BoatRemove paint defects on a boat using a variable-speed rotary buffer and appropriate grit-matched sanding blocks.14/09/2025 · Boon Township, United States
Publicado14/09/2025
Duração28:11
Visualizações9K
LocalizaçãoBoon Township, United States
Behind the Scenes: Making Fiberglass Panels for the Annapolis Boat ShowAndy of BoatworksToday fabricates 24 fiberglass practice panels for a training seminar at the Annapolis Boat Show.7/09/2025Publicado7/09/2025
Duração19:17
Visualizações9K
Bertram Moppie Project: Fixing Mistakes, Glassing Supports and Fairing A Custom Hatch CoverAndy replaces an off-center stringer and fairs a custom hatch cover for a Bertram Moppie restoration project.31/08/2025Publicado31/08/2025
Duração19:07
Visualizações10K
Teak Decks Or Cork? More Changes To The Aft Deck Of This Bertram Restoration?? Sure looks like it...Andy evaluates installing teak decking and aluminum access hatches on the aft deck of a Bertram restoration.24/08/2025Publicado24/08/2025
Duração16:02
Visualizações10K
The Fiberglass Cover I Built For My Bertram Turned Out BETTER Than I Hoped!!Andy builds a rigid fiberglass storage lid for a Bertram using Kusa coring and 5-to-1 epoxy.17/08/2025Publicado17/08/2025
Duração28:44
Visualizações17K
Setting Up A General Fiberglass Repair / Maintenance Kit For Your BoatA plastic tackle box stores essential fiberglass repair materials like Pettit Splash Zone for emergency offshore boat maintenance.10/08/2025Publicado10/08/2025
Duração24:47
Visualizações7K
Quick And Dirty Fiberglass Mold Worked Beautifully!!!Andy uses 1708 biaxial fabric and 2-to-1 epoxy to cast a fiberglass part from a mold.3/08/2025Publicado3/08/2025
Duração28:53
Visualizações17K
Making Custom Fiberglass Molds For Parts Doesn't Need To Be Difficult!Fabricating a custom fiberglass hatch for a Bertram 25 using OSB molds and chopped strand mat.27/07/2025Publicado27/07/2025
Duração21:02
Visualizações17K
Building The Fiberglass Mold For The Aft Deck Cover #Bertram25Andy builds a custom fiberglass mold for a Bertram 25 aft deck cover using half-inch spacers.20/07/2025Publicado20/07/2025
Duração26:19
Visualizações10K
Correcting A Design Flaw I Overlooked With My Bertram Transom ModificationAndy modifies a Bertram transom to seal a storage area during a twin-outboard conversion project.13/07/2025Publicado13/07/2025
Duração29:36
Visualizações12K
Mounting And Fairing The Aft Deck Bracing For My Bertram 25 ConversionAndy fabricates custom sanding blocks and trowels to fair the aft deck bracing on a Bertram 25.29/06/2025Publicado29/06/2025
Duração18:46
Visualizações12K
Fiberglassing The Aft Deck Supports #Bertram25Andy fits custom fiberglass framework into the transom of a Bertram 25 to support a new hatch.22/06/2025Publicado22/06/2025
Duração19:24
Visualizações11K
Building Out The Aft Deck Of The Bertram: Fabricating the fiberglass Cross SupportFabricating a custom fiberglass cross-support for a Bertram aft deck using 1708 biaxial cloth and epoxy.8/06/2025Publicado8/06/2025
Duração23:12
Visualizações12K
Building Out The Aft Deck : Cutting New Pockets And Reinforcing The Arched Support #Bertram25Andy reinforces a Bertram 25 transom arch using thickened epoxy, 1708 fiberglass, and Coosa board supports.1/06/2025Publicado1/06/2025
Duração21:23
Visualizações11K
New Fiberglass Mold To Frame Aft Deck Of The Bertram 25Andy builds a custom fiberglass mold for a Bertram 25 aft deck using chopped strand mat and polyester.25/05/2025Publicado25/05/2025
Duração30:23
Visualizações15K
No Video Today But I Think I Finally Figured Out My Problem :-)Andy's four-day fabrication problem may be solved, with mold prototyping and a test fit planned for Monday.18/05/2025Publicado18/05/2025
Duração3:12
Visualizações9K
Bertram Transom Mystery Solved / I Knew Better But Made The Wrong ChoiceApplying gel coat too thinly with a heavy-nap roller prevents proper curing on fiberglass boat transoms.11/05/2025Publicado11/05/2025
Duração16:44
Visualizações21K
Working On My Bertram Transom.. What Could Possibly Go Wrong?!?!Andy troubleshoots a failed gel coat cure on a Bertram transom while fitting structural fiberglass knees.4/05/2025Publicado4/05/2025
Duração27:17
Visualizações12K
Figuring Out How Much Paint You'll Need To Paint Your Boat!Calculate marine paint and primer volumes by determining total surface area and applying specific mix ratios.27/04/2025Publicado27/04/2025
Duração16:04
Visualizações9K
Beefing Up The Transom On My Bertram Moppie 25Installing three structural knees reinforces the transom of a Bertram Moppie 25 for an outboard engine conversion.20/04/2025Publicado20/04/2025
Duração16:52
Visualizações11K
Fairing The Transom On My Bertram 25Andy demonstrates techniques for fairing a Bertram 25 transom using longboards, guide coats, and epoxy filler.6/04/2025Publicado6/04/2025
Duração25:52
Visualizações20K
Fiberglassing The Stringer Extensions To The Transom #Bertam25Laminating 1708 fiberglass over stringer extensions on a Bertram 25 using non-waxed polyester resin and relief cuts.30/03/2025Publicado30/03/2025
Duração19:42
Visualizações14K
Extending The Stringers And Hidden Fiberglass Damage After Transom ReplacementRepairing transom voids requires grinding to solid fiberglass and layering 1708 biaxial cloth with epoxy resin.23/03/2025Publicado23/03/2025
Duração17:52
Visualizações14K
MOST VERSATILE TOOL FOR YOUR FIBERGLASS BOAT REPAIR PROJECTSA 1-1/8 inch variable-speed belt sander provides precise material removal and shaping for fiberglass boat repairs.16/03/2025Publicado16/03/2025
Duração12:22
Visualizações18K
I Don't Think I Want A Fiberglass Fuel Tank For This Bertram Project2/03/2025
Publicado2/03/2025
Duração16:01
Visualizações12K
How Can I Get This Fuel Tank To Fit In My Bertram??23/02/2025
Publicado23/02/2025
Duração10:15
Visualizações10K
I Avoided This Part Of The Bertram Project For Years But It's Finally Done And Time To Move On!16/02/2025
Publicado16/02/2025
Duração12:40
Visualizações12K
Filtrar e ordenar
Ordenar
Vídeo
Publicado
Duração
Visualizações
Localização
Série
Siga a história em ordem — os episódios que analisámos são reproduzidos aqui; os restantes abrem no YouTube.
Westwind Paceship 24 Sailboat Restoration26 episódiosEm curso
- 1
Will This Entire Victron Electrical System Fit In My Little Boat? - 2
V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work! - 3Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!
- 4Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!
- 5Everything Fits! ~ Coosa Bulkheads, New Soles & Closing Out The Old Thruhulls!
- 6Weeks Of Grinding Fiberglass Led To This Boat Restoration Moment!
- 72 marina options for the Summer, limited power both locations! WORK STILL NEEDS TO GET DONE!!
- 8Everything Is Starting To Come Together: Mast Mods, Fiberglassing, & Electrical!
- 9These Are The WRONG Sails For This Boat (+ Fiberglass Progress)!!
- 10The 600Ah Lithium Reality Check: Victron, Epoch, and ICECO for Off-Grid Survival!
- 11Fitting Structural Coosa Bulkheads WAY Better Than Factory!
- 12Templating and Cutting Coosa Panels for the New Sailboat Cabin Sole (1970 Paceship 24)!
- 13Gutting An Old Sailboat to Re-Build as a Modern Coastal Cruiser!
- 14600Ah of Lithium Just Showed Up for My 24' Sailboat!!
- 153 Ways to Laminate Fiberglass Patches for Boat Repair (One Works Better)
- 16Fiberglass Over Old Thru-Hulls — Permanent Repair!!
- 17Designing a Functional Quarter Berth Layout on a Small Sailboat!
- 18Correcting a Sagging Solid Fiberglass Sailboat Deck!
- 19I'll Never Be At This Fiberglassing Stage Again On This Sailboat Project | 1970 Westwind Paceship 24
- 20Why I’m Using Coosa Instead of Marine Plywood For My Sailboat Interior (This Is What I've Learned)
- 21Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Fiberglass Boat Repair Is Problem Solving!
- 22
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Portlights GONE! - 23
Grinding Fiberglass For Deck Hardware Removal, Winch Tear-Down & Chainplate Welding Concerns - 24
How to Spot Hidden Problems in a Used Boat (DIY Survey Guide) - 25
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Gutting The Interior For Inspection - 26
Saving A Classic: Restoring A 1970 Westwind Paceship 24 ~ Moving Day
Fiberglass149 episódios
- 1
This Bertram Hates Me lol! Transom Poll Results And Spring Pre-Launch Tip #1 - 1
Quantum 99 The Best Topside Paint For The #DIY ?? Part 1/2 - 1
About Boatworks Today ~ A 1 Day Documentary #1 - 1
Rebuilding A Foam Cored Rudder Part 1 - 1
There's A Hole In My Boat~ Gelcoat Color Matching (Part 1) - 1
Fiberglass Boat Repair~ There's A Hole In My Boat Part 1 - 1
Fiberglass Core Replacement Part 1 - 2
Pre-Launch Quick Tip #2 : Fairing For Gelcoat Repairs - 2
Rebuilding A Foam Cored Rudder Part 2 - 2
There's A Hole In My Boat~ Gelcoat Color matching Part 2 - 2
Fiberglass Boat Repair~ There's A Hole In My Boat Part 2 - 2
Boat Restoration~ Glass Magic Playmaster Part 2 - 2
Fiberglass Core Replacement Part 2 - 3
Rebuilding A Foam Cored Rudder Part 3 - 3
Fiberglass Boat Repair~ There's A Hole In My Boat Part 3 - 3
Fiberglass Core Replacement Part 3 - 4
Rebuilding A Foam Cored Rudder Part 4~ Fairing With Pettit EZ-Fair - 4
There's A Hole In My Boat (Part 4): Fairing The Repair For Gelcoat - 4
Fiberglass Core Replacement Part 4 - 5
Rebuilding A Foam Cored Rudder Part 5~ Applying Pettit Protect Barrier Coat - 21
Bertram Moppie Transom Replacement P1 And Spring Launch Tip: How To Use A Buffer On Gelcoat Or Paint - 22
COOSA TRANSOM ON BERTRAM MOPPIE 25 GOING IN! (Minor Epoxy Hiccup) - 23
Reinforcing The Bertram Transom With New Fiberglass - 24
Cutting Out The Transom Core On A Bertram Moppie 25! - 25
Digging Into The Bertram Moppie Transom (a little at a time) - 26
What To Do With The Transom On This Bertram 25?? - 27
GLASSING IN THE TRANSOM: TIPS AND TRICKS WORKING WITH FIBERGLASS! - 28
The Boat Is Ready, Transom And Fiberglass Prepped, Nothing Left To Do... - 29
EPOXY FOR BEGINNERS ~ How Much Filler Is Needed For Different Consistencies?? - 30
TOP TIPS FOR PAINTING YOUR BOAT! - 31
Alexseal Paint And Help From YOU!! - 32
STARTING THE FAIRING PROCESS ON THIS OLD SAILBOAT! - 33
LAYING FIBERGLASS START WITH SMALL OR BIG PIECE FIRST AND OTHER FAQ'S! - 34
FIXING FIBERGLASS MISTAKES! - 35
HOW TO REPAIR FIBERGLASS DAMAGE WITH LIMITED ACCESS! - 36
THINGS TO CONSIDER WHEN PLANNING YOUR FIBERGLASS BOAT REPAIR! - 37
Alexseal Changing The Game For DIY Boat Painting?? - 38
Glassing The Transom And Plans For The Coosa! - 39
All The Transom Core Is OUT!! (finally) - 40
2 Different Types Of Gelcoat Nonskid Applications For Your Boat Project! - 41
Does The Transom Leak?!?? - 42
Sides Of The Bertram Are Now Covered! - 43
Designing And Building The Fuel Locker Covers! - 44
Stubbing In For The Fuel Fill Line! - 45
Fairing The Coosa Bulkheads And Fiberglass Storage Lockers! - 46
Fiberglassing And Fairing The Coosa Locker Frames! - 47
Mounting The Coosa Locker Frames On A Bertram Moppie! - 48
Fiberglassing The Coosa Hatch Covers And Frame! - 49
Making The Coosa Hatches For The Storage Lockers ~ Bertram Moppie 25 - 50
Improvements For Boatworks Today In 2020?!?! - 51
Fairing The Coosa And Fiberglass At The Helm ~ How To - 52
Are There Any Resins That You Can't Use With Fiberglass?? - 53
Mounting The Coosa Panels And Fiberglassing Them In! - 54
Coosa Fiberglass Panel Tips and Lesson Learned - 55
Fiberglassing The Coosa Helm Inserts - 56
Fiberglassing Old Scuppers Closed ~ The Final Step!! - 57
Building Up The Locker Insert With MORE Fiberglass ! - 58
Fiberglassing In The Cockpit Locker Insert! - 59
Some Good, And Some Not So Good.. - 60
Making The Fiberglass Insert For The Bertram Locker - 61
Pulling The fuel Tank And Grinding Fiberglass To Prep The Cockpit For A New Layout! - 62
How To Break Down And Clean Your Paint Spraying Equipment! - 63
After Nearly One Year Of Creating Content Fulltime... - 64
Installing The Coosa Support Knees On The Bertram Moppie 25 - 65
Cutting And Fiberglassing The Coosa Supports - 66
Making The Templates For The Side Deck Supports On The Bertram! - 67
Hands On With The New Coring Material For The Bertram Project ~ Coosa - 68
Easiest Way To Apply A Perfect Nonskid On Your Boat Using Alexseal Paint! - 69
Can A $27 Airbrush Spray Pro Quality Boat Repairs Using Alexseal Paint?? - 70
How To Repair Deep Scratches On Your Boat Using Alexseal Paint! - 71
How To Roll And Tip Alexseal Paint On Your Boat! - 72
Alexseal Demonstration P1 ~ Best DIY Paint For Rolling And Tipping Your Boat? - 73
Cutting Bulkheads Out, Prepping Alexseal Panels And Help From You! - 74
Comparing Different Varnishes For Your Boats Brightwork - 75
Fiberglass Tips And Tricks (What Works / What Doesn't!) - 76
Making A Fiberglass Panel For Testing Alexseal Paint - 77
Cutting Out And Replacing A Section Of Fiberglass Stringer! - 78
Tying A Bowline Knot Contest ~ Fastest Way Ever?? - 79
Cutting Fiberglass Out Of The Cockpit And Chasing Down Problems - 80
Layout Ideas For The Bertram Helm - 81
No Video Sunday :-( - 82
Fairing The Fiberglass Helm ~ YT - 83
Fiberglassing Old Holes At The Helm! - 84
Can CSM (Chopped Strand Matting) Be Used With Epoxy?? - 85
Removing The Helm For Fiberglass Repairs! - 86
Final Sanding ~ Fairing The Fiberglass Deck Repair! - 87
Fairing The Fiberglass Deck Repair Bertram Moppie 25 - 88
Fiberglass Q&A And A Better Paint For Your Project Boat?? - 89
Did Laying New Fiberglass Fix The Deck On This Boat?? - 90
Fitting New Fiberglass, Whoopsies and Exciting Mail Call! - 91
Testing The Strength Of Different Fiberglass Resins! - 92
Shaving Fiberglass, New Approach To Stress Cracks And Mail Call! - 93
Getting Rid Of Old Screw Holes In Fiberglass - 94
Fiberglassing Stress Cracks And Making Progress! - 95
Grinding Out Fiberglass Stress Cracks And Getting Ready For Some Major Work! - 96
What's The Deal With The Fiberglass On This Deck?!? - 97
My Sanding Setup For Fiberglass - 98
Fiberglass Repairs ~ Fixing Old Holes In The Hull - 99
What Do I Use For Spraying Awlgrip And How Do I Manage The Fumes?? - 100
Solvent Testing To Determine If You're Working With A 1 Or 2 Part Paint - 101
Project Overview For Bertram Moppie 25 Restoration - 102
BoatworksToday Plans Going Forward? Weekly Video's And More Projects! - 103
Fairing And Finishing The Transom Replacement On A Boston Whaler 25 - 104
Laying New Fiberglass On The Transom Of A Boston Whaler 25 - 105
Replacing The Transom On A Boston Whaler 25 ~ Installing The New Plywood Core - 106
Transom Replacement ~ Cutting The Fiberglass And Removing The Old Core - 107
Building A Boat Hatch From A Fiberglass Mold! - 108
How To Make A Fiberglass Mold For Making New Parts On Your Boat!! - 109
Installing The Teak Deck And Wrapping Up This Project! Onto Something New 😜!! - 110
Happy Holidays - 111
Making Templates For The New Teak Deck - 112
Spraying Awlgrip Primer And Paint - 113
Repairing Hundreds Of Fiberglass Cracks To Get Ready For Spraying Awlgrip Paint! - 114
Fiberglass 101 Guide, A NEW WEBSITE And Hatch Update!! - 115
What Nonskid Did I Use For This Boat Project And How Did I Apply It?? - 116
The Last Hurdle On This Teak Deck Replacement Project - 117
Sail Life ~ I Think You'll Really Enjoy This Channel! - 118
Boatworks Today Pilot 3.1.11 - 119
Laying Fiberglass Over An Entire Cabin Top? Getting Ready For Awlgrip Paint! - 120
Patching Old Holes For The New Teak Deck!
Bertram Moppie 25 Restoration (Public)71 episódios
- 1This Bertram Hates Me lol! Transom Poll Results And Spring Pre-Launch Tip #1
- 2BoatworksToday Plans Going Forward? Weekly Video's And More Projects!
- 3Project Overview For Bertram Moppie 25 Restoration
- 4Fiberglass Repairs ~ Fixing Old Holes In The Hull
- 5What's The Deal With The Fiberglass On This Deck?!?
- 6Grinding Out Fiberglass Stress Cracks And Getting Ready For Some Major Work!
- 7Fiberglassing Stress Cracks And Making Progress!
- 8Getting Rid Of Old Screw Holes In Fiberglass
- 9Shaving Fiberglass, New Approach To Stress Cracks And Mail Call!
- 10Did Laying New Fiberglass Fix The Deck On This Boat??
- 11Fairing The Fiberglass Deck Repair Bertram Moppie 25
- 12Final Sanding ~ Fairing The Fiberglass Deck Repair!
- 13Removing The Helm For Fiberglass Repairs!
- 14Fiberglassing Old Holes At The Helm!
- 15Fairing The Fiberglass Helm ~ YT
- 16Reinforcing The Bertram Transom With New Fiberglass
- 17Layout Ideas For The Bertram Helm
- 18Cutting Fiberglass Out Of The Cockpit And Chasing Down Problems
- 19Cutting Out And Replacing A Section Of Fiberglass Stringer!
- 20Cutting Bulkheads Out, Prepping Alexseal Panels And Help From You!
- 21Hands On With The New Coring Material For The Bertram Project ~ Coosa
- 22Making The Templates For The Side Deck Supports On The Bertram!
- 23Cutting And Fiberglassing The Coosa Supports
- 24Installing The Coosa Support Knees On The Bertram Moppie 25
- 25Pulling The fuel Tank And Grinding Fiberglass To Prep The Cockpit For A New Layout!
- 26Making The Fiberglass Insert For The Bertram Locker
- 27Fiberglassing In The Cockpit Locker Insert!
- 28Building Up The Locker Insert With MORE Fiberglass !
- 29Fiberglassing Old Scuppers Closed ~ The Final Step!!
- 30Fiberglassing The Coosa Helm Inserts
- 31Coosa Fiberglass Panel Tips and Lesson Learned
- 32Mounting The Coosa Panels And Fiberglassing Them In!
- 33Fairing The Coosa And Fiberglass At The Helm ~ How To
- 34Making The Coosa Hatches For The Storage Lockers ~ Bertram Moppie 25
- 35Fiberglassing The Coosa Hatch Covers And Frame!
- 36Mounting The Coosa Locker Frames On A Bertram Moppie!
- 37Fiberglassing And Fairing The Coosa Locker Frames!
- 38
Cutting Fiberglassing And Fitting The New Bulkheads! - 39Fairing The Coosa Bulkheads And Fiberglass Storage Lockers!
- 40Stubbing In For The Fuel Fill Line!
- 41Designing And Building The Fuel Locker Covers!
- 42Sides Of The Bertram Are Now Covered!
- 43
Fiberglassing The Coosa Covers And Problems With The Armstrong Engine Bracket? - 44Does The Transom Leak?!??
- 45Digging Into The Bertram Moppie Transom (a little at a time)
- 46What To Do With The Transom On This Bertram 25??
- 47Bertram Moppie Transom Replacement P1 And Spring Launch Tip: How To Use A Buffer On Gelcoat Or Paint
- 48
Best Resin To Use With Coosa On Your Boat Project? - 49Cutting Out The Transom Core On A Bertram Moppie 25!
- 50
Removing The Rest Of The Transom Core (almost..)! - 51All The Transom Core Is OUT!! (finally)
- 52Glassing The Transom And Plans For The Coosa!
- 53
Fiberglassing The Armstrong Mounts And More Prep For Coosa! - 54
CUTTING THE STRINGERS AND READY TO TEMPLATE THE TRANSOM! - 55
BEST WAY I'VE FOUND TO TEMPLATE A TRANSOM, BULKHEAD OR WHATEVER! - 56
STARTING THE COOSA TRANSOM ON THE BERTRAM 25! - 57
Transom Jigsaw Puzzles - 58
BUILDING UP LOW SPOTS OF THE TRANSOM WITH FIBERGLASS - 59
LARGE BATCHES OF EPOXY TIPS / TRICKS AND INSTALLING THE TRANSOM CORE! - 60
FIBERGLASS FAIL ~ I MESSED UP :-/ - 61
TRANSOM ISSUES RESOLVED, MOVING FORWARD! - 62
THE NEW BOATWORKS TODAY SHOP IS READY! - 63
Moving The Bertram To The NEW Boatworks Today Shop! - 64
BACK ON THE BERTRAM MOPPIE RESTORATION, SHOP IS DONE! - 65
First Boat Project Of The Year Was A FAIL :-/ - 66
HOW TO BEAT GRAVITY WHEN USING THICKENED EPOXY! - 67COOSA TRANSOM ON BERTRAM MOPPIE 25 GOING IN! (Minor Epoxy Hiccup)
- 68
THE PART OF THE TRANSOM REPLACEMENT I'VE BEEN TRYING TO FIGURE OUT.. - 69
Transom Installed!! Then This Came Up... - 70The Boat Is Ready, Transom And Fiberglass Prepped, Nothing Left To Do...
- 71GLASSING IN THE TRANSOM: TIPS AND TRICKS WORKING WITH FIBERGLASS!
Bertram Moppie 25 Transom Replacement / Upgrade20 episódios
- 1This Bertram Hates Me lol! Transom Poll Results And Spring Pre-Launch Tip #1
- 2Reinforcing The Bertram Transom With New Fiberglass
- 3Digging Into The Bertram Moppie Transom (a little at a time)
- 4What To Do With The Transom On This Bertram 25??
- 5Bertram Moppie Transom Replacement P1 And Spring Launch Tip: How To Use A Buffer On Gelcoat Or Paint
- 6Cutting Out The Transom Core On A Bertram Moppie 25!
- 7Removing The Rest Of The Transom Core (almost..)!
- 8All The Transom Core Is OUT!! (finally)
- 9Glassing The Transom And Plans For The Coosa!
- 10CUTTING THE STRINGERS AND READY TO TEMPLATE THE TRANSOM!
- 11BEST WAY I'VE FOUND TO TEMPLATE A TRANSOM, BULKHEAD OR WHATEVER!
- 12STARTING THE COOSA TRANSOM ON THE BERTRAM 25!
- 13Transom Jigsaw Puzzles
- 14BUILDING UP LOW SPOTS OF THE TRANSOM WITH FIBERGLASS
- 15TRANSOM ISSUES RESOLVED, MOVING FORWARD!
- 16COOSA TRANSOM ON BERTRAM MOPPIE 25 GOING IN! (Minor Epoxy Hiccup)
- 17THE PART OF THE TRANSOM REPLACEMENT I'VE BEEN TRYING TO FIGURE OUT..
- 18Transom Installed!! Then This Came Up...
- 19The Boat Is Ready, Transom And Fiberglass Prepped, Nothing Left To Do...
- 20GLASSING IN THE TRANSOM: TIPS AND TRICKS WORKING WITH FIBERGLASS!
Gelcoat Vids16 episódios
- 1There's A Hole In My Boat~ Gelcoat Color Matching (Part 1)
- 1Fiberglass Boat Repair~ There's A Hole In My Boat Part 1
- 2There's A Hole In My Boat~ Gelcoat Color matching Part 2
- 2Fiberglass Boat Repair~ There's A Hole In My Boat Part 2
- 3Fiberglass Boat Repair~ There's A Hole In My Boat Part 3
- 4There's A Hole In My Boat (Part 4): Fairing The Repair For Gelcoat
- 7
How To Repair A Large Section Of Gelcoat Nonskid For Your Boat - 8
Gelcoat nonskid Spot Repair ~ How To - 9
Make A Fiberglass Mold Of Your Gelcoat Nonskid For Repair! - 10
Gelcoat Buffing And Care - 11
Gelcoat Or Paint? Which One Should I Use On My Boat Restoration!! - 12
There's A Hole In My Boat~ How To Apply Gelcoat - 13
There's A Hole In My Boat~ Sanding Gelcoat - 14
Will Gelcoat Stick To Epoxy? - 15
Gelcoat And Epoxy Bonding Results! - 16
Cleaning Gelcoat Non-Skid
Alexseal Paint9 episódios
- 1Alexseal Demonstration P1 ~ Best DIY Paint For Rolling And Tipping Your Boat?
- 2How To Roll And Tip Alexseal Paint On Your Boat!
- 3How To Repair Deep Scratches On Your Boat Using Alexseal Paint!
- 4Can A $27 Airbrush Spray Pro Quality Boat Repairs Using Alexseal Paint??
- 5Easiest Way To Apply A Perfect Nonskid On Your Boat Using Alexseal Paint!
- 6
A YEAR LONG SECRET - 7Alexseal Changing The Game For DIY Boat Painting??
- 8
ALL ROLL AND NO TIP ;-) PAINTING YOUR BOAT WITH ALEXSEAL! - 9
WHAT ARE THE REAL DIFFERENCES BETWEEN ALEXSEAL AND AWLGRIP WHEN IT COMES TO DIY APPLICATION??
Woodworking Ideas for Christmas Gifts!8 episódios
All Alexseal (overview, prime, paint, repair)8 episódios
- 1Alexseal Changing The Game For DIY Boat Painting??
- 2Alexseal Demonstration P1 ~ Best DIY Paint For Rolling And Tipping Your Boat?
- 3How To Roll And Tip Alexseal Paint On Your Boat!
- 4ALL ROLL AND NO TIP ;-) PAINTING YOUR BOAT WITH ALEXSEAL!
- 5Easiest Way To Apply A Perfect Nonskid On Your Boat Using Alexseal Paint!
- 6Can A $27 Airbrush Spray Pro Quality Boat Repairs Using Alexseal Paint??
- 7How To Repair Deep Scratches On Your Boat Using Alexseal Paint!
- 8WHAT ARE THE REAL DIFFERENCES BETWEEN ALEXSEAL AND AWLGRIP WHEN IT COMES TO DIY APPLICATION??
Perto na frota
É o proprietário deste canal? Reivindique-o ou ajuste como é listado.